Nosso blog sobre fibra óptica e cabo ethernet grampos acessórios
Transmission line support
There are special wedge-type clamps for a self-supporting optical cable, which are used for mounting overhead fiber-optic lines and allow you to quickly attach the wire to the suspension, securely fixing it and at the same time not damaging the sheath of the wire itself.All clamps of wedge-shaped fittings are made of high quality materials that are resistant to weather conditions, temperature changes and active solar exposure.
Solid clamps
Recently, fiber-optic cable is increasingly used in laying transmission lines for video surveillance, television and the Internet. The laying of an optical cable in some places is sometimes quite problematic. And the usual method of routing cables may not be suitable. Therefore, for the laying of optical cables, clamps are now often used when attached to points of support.We present to your attention a Drop wire clamp for FTTH network H15 fiber optic wedge clamp. This clamp is a new modified version of the product equipped with a powerful metal hook instead of a loop, which allows for an even more convenient fastening of the cable to the crosshead or hook.
Clamp for each cable
On our site you can purchase a Drop wire clamp for FTTH network H15 fiber optic wedge clamp.Anchoring clamp made of stainless steel and plastic insert used to create overhead lines from flat fiber optic cable type eight with a supporting cable 2–4 mm. Due to the design of the clamp, the cable is clamped evenly and along the entire length, and the protrusions located on the inserts resist sliding of the cable at high longitudinal loads. The anchoring clamps have a robust stainless steel housing for wire insertion loops, wedge-shaped and flat clamping on which there are many projections.
Accessories for laying transmission lines
To connect the network, you need a branch piercing clamp, it is externally insulated, but at the heart of a metal structure with pointed teeth. During installation, they pierce the insulation and reliably cut into the aluminum core, without violating the strength of the core. Due to the external insulating protection, the connection point remains completely closed, which prevents corrosion.
Reliable and long-serving clamps
For the installation of transmission lines, anchor clamps are almost always necessary, designed to hold the cables in the state of the string. The standard distance to the nearest support should not exceed 50m, but everything is individual since the weight load depends on the connection section. So, there are cables in which a 100-meter span is extended. An anchor tension clamp is mounted using a bracket or other anchorage directly on the post or facade of the building. Often it does not take a lot of time and effort from an experienced craftsman to complete all stages of work. Also, it is not necessary to buy special installation tools.