Today, the most widespread are two technologies for fastening overhead cables: with fastening cables using clamps (tension and support), and also by attaching the supporting cable.
The first method involves the use of special clamps (tension and support), which are attached to the reinforcement (brackets, hooks, etc.), installed on supports, pillars, or facades of houses.
On our website, you can find a huge selection of cable clamps. Before starting work, it is recommended to clarify all the details and read the characteristics of each item that will be needed to complete the work.
We advise you to pay attention to the Wedge type tension clamp H6 anchor clamp that is designed for fastening and reliable holding in the tension of round self-supporting cables with a diameter of 6 to 7 mm. It is also possible to fasten cables with a larger diameter - up to 9 mm, but during installation, the wedges will have to be removed from the clamp body. The main application of the clamp is when constructing overhead communication lines along with lighting and power poles with distances between supports up to 50 m.
Wedge type tension clamp H6 anchor clamp consists of an injection-molded plastic body made of high-strength, frost-resistant plastic and self-adjusting polymer wedges that grip the carrier without damaging the insulation. The fastening eyelet made of galvanized steel wire 5 mm can be removed if necessary, which provides additional ease of installation. The clamping wedges are protected from random falling out by a special lock. The clamp is made of a durable material that is resistant to UV radiation and temperature extremes.
The main advantages of this type of clamp:
• Simple construction
• Durable, frost-resistant material
• Self-adjusting polymer wedges
• Tool-free for installation
• High-quality steel wire hinge
• Reliability and power
It is also worth mentioning that the Wedge type tension clamps H6 anchor clamp provides clamping and fastening of cables passing through the clamp sheath without damaging or exposing the structure of the supporting cable. The reasonable price of this tension clamp, given its main advantages, cannot but rejoice.
The use of self-supporting structures with the use of tension clamps H6 allows several times to increase the speed of building networks, to facilitate the repair and replacement of sections of highways. The increase in the speed of installation of networks more than covers the cost of fittings for hanging cables.
If you want to buy this or any other type of clamp, just contact us.
