Ethernet cable cat 6a Riser cable LSZH Pure solid copper UTP bulk 1000 ft zero halogen

Cat6A Riser (CMR), 1000ft, LSZH Pink, 23AWG 10G 4 Pair Solid Bare Copper, Unshielded Twisted Pair (UTP), LSFROH Pure Copper Bulk Network Cable

Enhanced Category 6A Low Smoke Zero Halogen U/UTP 1000ft Ethernet Cable LSZH CMR pink cat6A LSFROH pure copper cable:

• Cable 4*2*0.57 (U/UTP-cat6A LSFROH)
• Jacket FR LSZH - Low smoke zero halogen / low smoke-free of halogen (LSZH or LSOH or LS0H or LSFH or OHLS or ZHFR).
• p/n: 7931210
• Packing: 1000 feet (305 m), plywood reel
• Weight 42.8 lbs (19.4 kg)
• Standard ANSI/TIA-568-C.2
• Condition is New.

HIGH-PERFORMANCE NETWORK CABLE
This low smoke free of halogen Riser rated cat 6A network cable is 23 AWG with 4 pairs (8C). Suitable for 1 Gigabit and 10-Gigabit Ethernet. Bandwidth tested up to 750 MHz. Supports PoE, PoE+, and PoE++ (IEEE 802.3af/at/bt) up to 60W and 300V DC.

HASSLE-FREE PACKAGING
1000 feet (305 meters) of our ODESKABEL product has been packaged on a tangle-free, easy pull reel/spool so you don’t have to worry about getting behind on your next job.

LSZH cable - Low smoke zero halogen / low smoke free of halogen (LSZH or LSOH or LS0H or LSFH or OHLS or ZHFR).

100% SOLID BARE COPPER CONDUCTORS
Pure bare copper produces a stronger signal along with better conductivity and flexibility when compared to copper clad aluminum (CCA).

FOR USE INDOORS
The pink Riser rated jacket is for use in between floors, in-wall, and non-plenum spaces. Help fires from spreading floor to floor in vertical installations with mild flame retardance.

CERTIFIED
Our data cables have been in compliance with ANSI/TIA 568.2-D standards, RoHS-3 compliant, IEC 61156-5, and EN 50288-11-1 certified. Fire safety: CMR, CSA FT4.

DESIGN
1) Conductor: solid bare copper, nominal diameter 0.565 mm
2) Insulation: HDPE, nominal diameter of 1.08 mm
3) Pair: two conductors twisted together
Color identification of pairs:
   pair 1: white-blue / blue
   pair 2: white-orange / orange
   pair 3: white-green / green
   pair 4: white-brown / brown
4) Separator: LSZH cross-web, dimensions 4x4х0.34 mm
5) Jacket: flame retardant LSZH thermoplastic compound, thickness 1.0 mm, nominal cable diameter 7.4 mm

APPLICATION
PBX, V.11, X.21, ISDN, Ethernet (10Base-T), ATM-25/52/155 Mbit/s,
100VG-AnyLAN, Fast Ethernet (100BASE-TX), Token Ring 16/100 Mbit/s,
Gigabit Ethernet (1000BASE-T, 1000BASE-TX), Firewire 100 Mbit/s,
2,5/5/10 Gigabit Ethernet (2.5/5/10GBASE-T), ATM LAN 1.2 Gbit/s 

INSTALLATION AND OPERATION CONDITIONS
For stationary installation inside buildings, stations, structures, and equipment. 
Recommended operated on frequencies up to 750 MHz.

СOMPLIANCE WITH THE REQUIREMENTS 
System: ISO/IEC 11801, EN 50173-1, ANSI/TIA 568.2-D
Cable: IEC 61156-5, EN 50288-11-1, ANSI/TIA 568.2-D
Fire safety: CMR, CSA FT4 

MECHANICAL CHARACTERISTICS
Temperature range:
   During installation -10 °C ... +60 °C
   After installation -20 °C ... +60 °C
Bending radius:
   During installation ≥ 8 cable diameters
   After installation ≥ 4 cable diameters
Tensile stress ≤ 85 N

ELECTRICAL CHARACTERISTICS
Capacitance, pF/m - ≤ 56
Direct current resistance, Оhm/km - ≤ 85
Insulation resistance, GOhm/km - ≥ 5
Resistance unbalance, % - 2
Signal propagation velocity, s - 0,68
Propagation delay, ns/100 m - ≤ 534+36/√f
Delay shift on the frequency 100 MHz, ns/100 m - ≤ 30
Characteristic impedance in the frequency range of, Ohm:
   1-100 MHz - 100±15
   100-250 MHz - 100±22
   250-500 MHz - 100±25
   500-750 MHz - 100±27
Test voltage between cores, (DC, 2 s), kV - 2.5