Anchor clamps for aerial networks

Anchor-type tensioning clamp H3 is designed for fixing and holding in tension optical cables of round cross-section with diameter of 4-6 mm, type "8" ropes on steel wire or rope. The main application of the clamp is the construction of communication lines on the poles of lighting and power transmission with a distance between the rods up to 50 m. Manufactured from strong plastic, stable to UV radiation and temperature fluctuations. Mounting hinge with zinc-plated steel wire Ø5 mm can be removed if necessary, which provides additional ease of installation. Movable wedges of the clamp are protected from arbitrary falling out by a unique locking device.
Key Features:
- The main application of the clamp is the construction of communication lines on lighting and power transmission poles with a span length of up to 50 m.
- The tensioning clamp has a removable loop for attaching to hooks or brackets with a hole diameter of at least 6 mm. The mounting loop is made of hot-dip galvanized steel wire. If necessary, it can be removed, which provides additional ease of installation.
- For ease of use, the clip has a lock that prevents the wedges from falling out, and a system of guides, which ensures the synchronous movement of the wedges when they are opened.
- No special tool is required to install the clip.
- The H3 clamp has a budget version H3(D), with lower rigidity for loads up to 1.4 kN.
- Permanent static load, kN 1.6
- Breaking load, kN 1.8

Anchor clamps type H28 are designed to anchor and keep taut optical cables during construction of communication lines on lighting poles and power lines. - The tensioning clamp has a removable loop for attaching to hooks or brackets with a hole diameter of at least 6 mm. The mounting loop is made of hot-dip galvanized steel wire. If necessary, it can be removed, which provides additional ease of installation.
- For ease of use, the clip has a lock that prevents the wedges from falling out, and a system of guides, which ensures the synchronous movement of the wedges when they are opened.
- No special tool is required to install the clip.
- The H3 clamp has a budget version H3(D), with lower rigidity to loads up to 1.4 kN.
- Permanent static load, kN 1.6
- Breaking load, kN 1.8

Anchor clamps type H28 are designed to anchor and keep taut self-supporting optical cables during construction of communication lines on lighting poles and power lines. It can be used with round cables with diameter from 4 to 6.5 mm and with cable of "eight" type, including dielectric supporting element. Increased length of the clamp body and the wedges provides a large contact area with the cable sheath and allows to fix cable up to 120m in span.
Body and wedges of anchor clamp H28 are made of high-strength plastic stabilized against UV rays. For ease of use, the clamp has a lock that prevents the wedges from falling out, and a guide system that ensures synchronous movement of the wedges and their expansion. The galvanized steel wire hinge Ø5 mm can be removed if necessary, which provides additional ease of installation.
=Anchor type strain relief H6 is designed to fasten quickly and securely hold round self-supporting cables with a diameter of 6-7 mm. It is also possible to fasten cables with a larger diameter - up to 9 mm, but in this case the wedges will have to be removed from the clamp body during installation.
The main application of the clamp is the construction of overhead lines on lighting and power transmission poles with a distance of up to 50 m between poles.
The clamp is made of durable plastic resistant to UV radiation and temperature fluctuations. The mounting hinge made of galvanized steel wire Ø5 mm can be removed if necessary, which provides additional ease of installation. The clamping wedges are protected against unintentional falling out by a special locking device.

Anchor clamps type H20 are designed to anchor and hold taut self-supporting cables with a diameter of 8 to 14 mm for construction of communication lines on lighting and power transmission towers. Increased length of the body and wedges of the clamp provides a large area of contact with the cable sheath and allows you to attach cable to the spans of up to 120 meters.
Body and wedges of H20 anchor clamp are made of high-strength plastic stabilized against UV rays. For ease of use, the clamp has a lock that prevents the wedges from falling out, and a guide system that ensures synchronized movement of the wedges and their expansion. The fixing hinge made of galvanized steel wire Ø5 mm can be removed if necessary, which provides additional ease of installation.



Older Post Newer Post

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods