High-quality clamping fittings

The quality of the clamping fittings determines the reliability of overhead transmission lines based on self-supporting insulated wires. Anchor wedge clamps are used when installing power lines designed to fasten and hold a circular cross-section independent, self-supporting wire in a taut state.
The H3 clamp includes:
A frost-proof plastic housing.
Synthetic wedges.
A hinge made of galvanized steel.
The UV-stabilized, high-strength plastic ensures a secure attachment in all conditions.

No need to separate or clean the support element for attachment during installation. No tools are required.
Cable sheathing is not damaged when using these anchor clamps.

An adequately installed device can firmly secure a self-supporting insulated wire and protect the cable from an explosion under critical loads. It is recommended to use elements resistant to UV radiation and weathering. Such fasteners must meet the following criteria:

- easy and fast installation (no special skills or additional tools are required, thus avoiding cable damage during installation);
- reliability (allows the cable to remain intact even if damaged, such as by a fallen tree during a thunderstorm)
- safety (the risk of injury during installation is minimized)
- quality (anchor clamp is resistant to stress, tension, heat, and vibration);
- the removable hinge has anticorrosive properties thanks to the galvanized coating;
- The wedge design allows a reliable wire fixation without damaging the insulation.

The clamp's operation principle is based on tightening movable wedges on the cable. In turn, the products are attached to the brackets with special clamps. When purchasing devices, the diameter of the line and the maximum possible tensioning force play an important role. Between each other, clamps differ in materials, dimensions, and other characteristics.

Technical specifications:
Wedge-shaped clamp for self-supporting RO cables with a diameter of 5 to 7 mm and cables with outriggers (wire, rope, or fiberglass rod).
The H3d clamp consists of a frost-proof plastic body, plastic wedges, and a galvanized steel hinge.
No need to separate or clean the support element for attachment during installation. No tools are required.
The cable sheathing is not damaged when using these anchor clamps.

Our company offers you anchor clamps at a reasonable price. We guarantee each product, which means we are responsible for all our products.

The quality of the product meets all the requirements of the regulatory and technical documentation governing the work of laying overhead power lines. A wide range allows you to buy the suitable anchor clamp for cable at a bargain price, using which you can best solve the design problems of any complexity.


Older Post

Net Orders Checkout

Item Price Qty Total
Subtotal $0.00
Shipping
Total

Shipping Address

Shipping Methods