Our blog about fiber optic and ethernet cable clamps accessories

Navigation technology involves winding an optical cable onto a supporting element using a special winding machine. Let us consider in more detail the main stages of this process. Mounting the bearing on the supportsA self-supporting cable with a diameter of 7 mm or more can be used as a supporting element. Spiral clamps are used to secure the carrier as close to the support as possible. Installation of optical drop clutchesThe optical coupler is mounted on a special bracket, which is located at some distance from the support. It is better to install the coupling above the self-supporting cable (optical...

When installing fiber-optic communication lines, one of the main processes determining the degree of communication distribution and its effectiveness is the installation of optical fibers. During the work, the fibers are combined with each other and the cables are laid. Reinforcement, which provides mechanical safety of the joint and fastens compatible fibers, called optical fiber connectors. The main conditions that the connectors must meet are: the triviality of the structure; reliability of fastening; minimal losses; resistance to environmental factors. There are two types of losses that follow the combination of fibers: internal and external. Internal losses relate to the characteristics...

Optical cable is produced in different countries and several designs are currently being developed. A large distribution is received by several of them: Tape type; With core core; With a free tube; With a free bundle of fibers. Ribbon Type Optical CableIn this type of design, the optical fibers of the cable are combined into ribbons located inside the core tube. Cable composition: Polyethylene coating; Exhaust cables; Wire power element; Core tube; Aggregate; Optical fiber tape; Hydrophobic tape; Coated corrugated steel; Ribbon Type Optical Cable Design. Profile wok design with core coreIn this design there is a figured core with...

Optical fiber cables are products that contain optical fibers and a power element located in a protective sheath. Additionally, depending on the operating conditions of the cable, it can be enhanced by armor (for example, for laying in the ground). Optical cables are divided according to the conditions of use and purpose. Consider the main classification. By appointment, they are divided into: trunk (divided into international and intercity); intraband (intercity and connecting); local (connecting, distribution and subscriber); intrasubject (station and subscriber). According to the conditions of use, the optical cable is divided into: underground (directly into the ground, cable ducts,...

The choice between anchoring or suspension depends on the chosen network configuration. Anchoring is recommended on transport and distribution networks for cable fixing on poles. Suspension however is used on intermediate poles in order to avoid that aerial cables hang randomly between the two extremity poles used for the dead-ending. Anchoring and suspension are essential to preserve reliable telecom networks. US Communication Service fully understands the importance of these two operations and that of rigorously respecting engineering rules during telecommunications network deployments. To empower dependable ultrafast broadband deployments, UScomService has developed unparalleled ranges of cable dead-end solutions for spans up...